Titanium wire
Standard : ASTM F136, ASTM F67,ASTM B863, ISO5832/2, ISO5832/3
Grade : Gr1, Gr2, Gr3, Gr4, Gr5, Gr9, Gr12, Gr23
Grade for welded wire: ERTI-1,ERTI-2,ERTI-5,Erti-9 etc
Size : DIA 0.5-6 MM Length :Straight wire to length or coil wire
Application : Electronics, Medical, Chemical, Petroleum, Pharmaceutical, Aerospace, Jewelry, 3D printing, Glasses frames etc.
Feature : 1.Low Density and High Strength
2.Excellent Corrosion Resistance
3.Good resistance to effect of heat
4.Excellent Bearing to cryogenic property
5.Nonmagnetic and Non-toxic
6.Good thermal properties
7.Low Modulus of Elasticity
GRADE | SPECIFICATIONS |
AWS A5.16 | ASTM B863 | AMS |
|
Commercial Pure Titanium | ERTi-1,2,3,4 | ASTM B863 Gr1,2,3,4
ASTM F67 Gr1,2,3,4 | AMS 4951,
AMS 4921 |
|
Ti 6Al-4V | ERTi-5 | ASTM B863 Gr5 | AMS 4954 |
|
Ti 6Al-4V Eli | ERTi-5 Eli | ASTM B863 Gr23
ASTM F136 Eli | AMS 4956 |
|
Ti 0.2 Pd | ERTi-7 | ASTM B863 Gr7 | ---- |
Ti 3Al-2.5V | ERTi-9 | ASTM B863 Gr9 | ---- |
Ti 0.3Mo-0.8Ni | ERTi-12 | ASTM B863 Gr12 | ---- |
DIAMETER & TYPES |
DIAMETER RANGE | TYPES |
mm | inch | Coil | Spool | Straight |
0.05 to 0.78 | 0.002 to 0.031 | Yes | Yes | No |
>0.78 to 3.25 | >0.031 to 0.128 | Yes | Yes | Yes |
|
> 3.25 to 6.00 | > 0.128 to 0.236 | Yes | No | Yes |
|
* Diameter Tolerance: +/-0.05mm (+/-0.002”) or finer
* Spools: 100mm – 300mm (3.9” – 12”)
* Straight Length: 300mm - 3000mm (12” – 118”) |
Chemical requirements
| N | C | H | Fe | O | Al | V | Pa | Mo | Ni | Ti |
Gr 1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | bal |
Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | bal |
Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | / | / | / | / | / | bal |
Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | / | / | / | bal |
Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
Tensile requirements
grade | Tensile strength(min) | Yeild strength(min) | Elongation(%) |
ksi | MPa | ksi | MPa |
1 | 35 | 240 | 20 | 138 | 24 |
2 | 50 | 345 | 40 | 275 | 20 |
3 | 65 | 450 | 55 | 380 | 18 |
5 | 130 | 895 | 120 | 828 | 10 |
7 | 50 | 345 | 40 | 275 | 20 |
9 | 90 | 620 | 70 | 438 | 15 |
12 | 70 | 438 | 50 | 345 | 18 |
